Finished Plastic

Industrial equipment is quite natural that regardless of any business investment opportunities, acquisition of equipment should be linked to savings. But it should not be at the expense of quality produced with the help of the finished product. In this sense, common to us recently, the concept of ‘value for money – money’ is just absurd, because the issue is primarily a desire to acquire the most cheap machine, without delving deeply into its design concept and technical equipment. The real savings, does not reflect negatively on the finished product can be achieved only when the machine is equipped with only those units that are fully ensure the implementation of a given technology, and has no excess, which will not be used, and its performance meets the requirements of production.

So, if assumed wrapping just flat edges of panel blanks, and only a thin insulated edge plastic (1 mm), enough machines to be fitted with glue spreading unit, a device for packing of plastic, and units for the removal of face overhangs and eaves on the plate. It may even be that would be unnecessary and the device with fabric disk, clears the edge of the blank glue residue-melt faces and on the edges. But, if for example, assumed veneer edge pieces of laminated plates with thick plastic (3 mm), the machine should be further equipped with not only these units, but surface scraper – for chamfering and remove the glue residue-melt from the reservoir. Seriously increases the quality of pieces and application device for applying antiadgezivnogo tools using which glue-melt more easily removed from the reservoir cycles, which did not need to be strongly pressed to the workpiece, and they will not leave scratches on it.

Products

In addition, there is a one-and dvuhtarifnye devices. The second allows take into account the consumption of electricity in the main and preferential (night, Saturday, Sunday) tariffs. Among other important performance note accuracy class, nominal and maximum currents, the threshold sensitivity. Traditional inductive devices are essentially electric – electricity is converted into rotational motion of the disc, whose rate increases with increasing energy and decreases with its decrease. In other words, the account 'electricity' is reduced to counting the number of revolutions the disk.

Such devices have several disadvantages: low sensitivity, due to inertia mechanical part, the ease with which they are amenable to external influences that can distort readings. Besides induction counters seriously hamper the automation system of accounting. The conversion of electrical energy into mechanical energy does not need advanced device with electro-mechanical (panel similar to that in the induction models) and electronically (as a rule, liquid-crystal display) indicator of consumption. Counters with liquid crystal display records, are more narrow range of operating temperatures. Typically, the lower limit of -20 C. This does not mean that when the temperature drops below a critical instrument cease to maintain a record, but take readings from the lcd display will be difficult. Today the Russian market represented a number of devices into account the power consumption. The most usual form are Products of the Moscow factory of electrical appliances. Singleton-rifny electronic counter ESR-52 – a modern device with an electromechanical indicator and the accuracy class 2. It is designed to operate in single-phase 220 V, it is functioning correctly in a wide temperature range (lower limit of -40 C), thus can be used in unheated buildings.